A&Q about 350Z
Q:
Hello troupe,
do I need to remove the fan to get at the sensor on this 1992 eagle summit 1.5?
from above or below and with a wrench?
-NOOB
A:
I wouldn't take the fan shroud off. Hit the parts store and grab yourself an O2 sensor socket. Its a 7/8" socket with half of one side cut out for the wire.
Another thing I've done before, but its risky... is to cut the wires off and then use a regular socket. Problem is, if you can't get the old one out you can't drive it to the exhaust shop for help
A:
are the 4 bolts holding the fan on that hard to get too?
A:
like curtis said, this is what you need.