A&Q about 350Z
Q:
heya,
does anyone know the exact diameter of the intake pipe as i want to buy a universal induction kit and dont know what it will need to accomondate
My car is a 1991 Mk2 Golf GTi 8V digifant
cheers
jamie
A:
You don't want to attach a filter directly to the intake pipe as you will bypass the air flow meter, the car will then run like **** (if at all).
You need to buy a bosch maf housing adapter plate and then bolt the filter onto this. Something along the lines of this:
Hope that helps you :)
A:
can i not just bolt it on where the airbox should be, surely that wont bypass the MAF senor
A:
yes you can but you will need an adapter the MAF sensor does have a round hole its square.
the abvove mention adaptor will be fine
or by a K&N and get an adapter free!!!
A:
I wouldn't bother with an induction kit. Take the airbox off and inside at the front there is a plastic insert. Push this out, buy a decent panel filter and drill lots of holes in the wing side of the airbox. I found this was better than an induction kit and saves you £££. Just my 2p worth