A&Q about 350Z
Q:
this should get the ole ticker pumpin`, thats on a vr6 head
A:
A:
lol - its a dustbin
should make it go some.
A:
should make it go some.
It does
Tom.
A:
that's as big as a vortech V1!
A:
Bet that takes a fortnight to spool up too...
A:
what manifodl is that? Is the turbo to the right of the head and down?
A:
Based on when my T04E starts pumping on a swapt volume of 2966cc that compressor housing will only start working at over 3500 to 3750rpm...
Thats going to need some amount of fuel to keep it happy at the top end.........12 injector setup require there for sure.
What size cc and CR you looking at using??
A:
12 injectors? she`s ok at the mo on 6, spins up around 3200rpm got 14psi before 3800rpm, quick enough but won`t stay quick enough for long but it still being tested so we`ll find out soon enough
A:
12 injectors? she`s ok at the mo on 6, spins up around 3200rpm got 14psi before 3800rpm, quick enough but won`t stay quick enough for long but it still being tested so we`ll find out soon enough
Is that one of your manifolds?
A:
so fast as the peanut? or just mildly suicidal?
A:
mildly suicidal to scary, not peanut style, all through the front wheels,
A:
mildly suicidal to scary, not peanut style, all through the front wheels,
A:
Is that one of your manifolds?
its from IbiVR, nice piece of kit
A:
i've just decided that vr turbo is far too small, this one is a proper VR6 turbo ;-)
A:
nice manifold that, beats a charger anyday
A:
NICE!!!
5.5krpm spins up, takes off...................
6.5krpm REV LIMIT!!!
Bugger!
A:
no, spools up at 3000rpm. revs to 7500rpm.
A:
lol, even with the BIG turbo?
A:
you have got to be having a laugh!!!
what kind of compression ratio has that vr got.. 6:1!!
Has anyone got twin turbos yet?
A:
you have got to be having a laugh!!!
what kind of compression ratio has that vr got.. 6:1!!
Has anyone got twin turbos yet?
low cr is for systems that haven't been designed properly for cooling, can't see any other reason for going really low with water injection, nitrous and advanced intercooling possible.
A:
i see the manifold is full-race.com
A:
bit tight on inlet isn't it?
going to be turning left all the time as the turbo spools up and sucks the suspension turret towards it!!
A:
bit tight on inlet isn't it?
going to be turning left all the time as the turbo spools up and sucks the suspension turret towards it!!
And any small dogs/cats/children that happen to be near it!
A:
bit tight on inlet isn't it?
going to be turning left all the time as the turbo spools up and sucks the suspension turret towards it!!
It goes well enough,don't worry.